o You purchase here one Bag in Barrel 5 Litre (wine dispenser)
o Inclusive Free 5 liter "Bag in Box" with tap so you can start filling right away!
o Made of oak wood with metal rings.
o Ideal to drain fluids filled in bags like Wine, Juice, Spirits, Liquor, Whisky, Beer
o Instead of tapping in a conventional cardboard box/aluminum bag, this is much more visually appealing: "Freshly tapped from the oak barrel"
o Capacity up to 5 liters. The barrel volume is compatible for standard winebags.
o Set consisting of: barrel, removable lid with tap hole, tap stabilizer, stand and a plug to close the bunghole also one 5 Liter bag with a tap is included.
o in the removable lid we drilled a large taphole already. In order for the lid to sit properly, it must be pressed correctly into the metal guide. There is a wooden bridge inside the barrel so that your bag lies flat.
o ATTENTION: this barrel design is NOT suitable for direct filling with liquids, you need your own filled bag, which you insert into the barrel. Also NOT suitable for oaking distillates - here you have to switch to our toasted barrels in the MAAJ program.
o The barrel is left natural on the outside and inside and is made of untreated oak. Fitting with electrically galvanized metal rings which cannot rust.
o Plug made from robust cherry wood.
o The absolute eye-catcher in your kitchen and ideally suited for rustic decoration.
o Dimensions:
o Total height jacked up to the plug = 32 cm
o Barrel: Width = 19.5 cm ; Length = 26 cm ; Height 20 cm
o Stand: Length = 20 cm ; Width = 22cm
o Tap hole diameter: 4 cm
o The barrels are made from Slovenian oak, which has an optimal, fine-pored wood structure. The age of the tree is also important for a good cask. Trees with a large diameter (age) located at higher altitudes, which grow slowly are ideal raw materials for casks and are carefully selected for this production. The wood is sawn into staves by local Slovenian forest farmers in the sawmill and delivered directly to the cooperage. Now the wood is dried for at least 2 years before it is used for barrel production. Then the individual wooden slats are sawn to size. The individual wooden sticks are then dried again to achieve a moisture content of less than 10%, which is necessary for optimum quality. This has the advantage that the target moisture content of the wood is below 10% and the wood no longer "shrinks", i.e. it retains its shape and can no longer change. Now the staves are selected and assembled in the cooperage, then pulled together under moisture and heat (this step is the most delicate and requires the cooper's experience). Then the base is inserted and the outside of the barrel is ground. Finally, the barrel rings are attached. When the barrels leave the cooperage, they have a residual moisture content of only 7%. From the first production step, starting with the selection of the tree to the final leak test, you can expect precise craftsmanship from the Slovenian manufacturer and thus a high-quality barrel as the end product.
o In the third generation, the wooden barrels are made in a small Slovenian family business, the art of cooperage has been passed on and refined to the descendants within the family for over 100 years. The traditional manufacturer has a wealth of experience in barrel production and knows the importance of the wood selection, which is then also used in production. Therefore, great importance is attached to the right selection of the optimal wood from domestic Slovenian forests. Since it is a natural raw material, different grains are possible.
o This is a natural raw material, so different grains are possible.
o High quality
o MADE IN SLOVENIA
o NEW
o You can now pimp your wine barrel with a personal engraving or with a flagg. These options are not included in the standard version, they must be purchased separately for an additional charge by selecting these variants separately in the right-hand selection field.
o SKU 12061-12063 with flag - only possible for Germany, Austria and Switzerland - additional charge each +2.99 EUR:
o We can offer a nice DE / AT / CH flag, not fixed so you as customer can decide self, where you place the flag.
o Dimensions Germany flag (rectangular): Length = 40 mm; Width = 25 mm
o Dimensions Austria flag (rectangular): Length 40 mm; Width = 25 mm
o Dimensions Swiss flag (pointed): Length = 40 mm; Width = 44 mm
o The colorful original colors are used.
o Other country flags on request - but only possible with large quantities and with longer delivery times.
o Personalization with your desired engraving (branded in one color):
o SKU 14 1551 Engraving direct on barrel Frontside with your individual Text in desired Font additional charge + 25.00 EUR.
o SKU 12 047 Engraving directly on the barrel Frontside with your own customer picture additional charge + 35.00 EUR
o SKU 12 048 engraving directly on the barrel Backside additional charge + 25.00 EUR
o SKU 12 049 Engraving directly on the stand, additional charge each side + 15.00 EUR
o SKU 12 076 to 12 080 Engraving with motif 1 to 5 on front side with individual text* additional charge +25.00 EUR
* Please note that the font, font size and place are here fixed, you can freely choose the text content inside the selected motif.
o Important: we burn the engraving directly into the wood, monochrome. Easily possible are letters, numbers, texts and special characters in your desired font. You can choose your favorite font freely. As customer images are possible graphics / logos, please email us a ready, high-resolution template, recommended in vectores, pixel images such as jpg tif bmp, etc. should also have a good resolution. Hard to engrave are extremely elaborate images with the finest lines / shades / barely recognizable content, etc. NOT possible are colored content. Please note that each barrel has different grains / structures / characteristics in the wood, as wood is a natural raw material. This special feature is then reflected in the engraving, it is not 100% uniformly homogeneous / even layer painted but the engraving is burned into the wood. We place the text or the MAAJ-MOTIVE or the customer graphic optimally on the respective size and try to extract the optical and space-related maximum, e.g. we must also consider the tap hole and the assembled tap. We can engrave large barrels up to a maximum of 11x11cm. If you have any questions or queries, please contact us in advance, we will gladly help you personally and look at your file template for review.
o Attention: To tell us your desired engraving: after placing the article in the shopping cart, please proceed to the cash register, on the payment method page there is a field "Insert personal memo relating to your order - Insert your comments on this order here" Note in this field your desired text and which font we should take eg Arial etc.
o To send us your own finished file template with your customer image / logo: complete the purchase and payment completely and submit us the image / logo / template to be engraved immediately after purchase by e-mail to our e-mail address info (at) maaj.de and note in the subject line the order number, so that we can correctly assign your picture. You will automatically receive the order number by e-mail after you have completed the checkout process of this order. Therefore please think about the engraving you want exactly before the purchase and let us know as soon as the order has been completed.
o A personal and special way to customize your gift. The recipient will be happy about "his" own barrel.
.jpg "Bag in Barrel in oak wood")
.jpg "bag in box")
.jpg "Preview: Bag in Barrel in oak wood")
.jpg "Preview: bag in box")
.jpg "Bag in Barrel in oak wood")
.jpg "bag in box")